Ajax FireProtect 2 SB white Wireless fire detector with temperature sensor with built-in batteries
- Brand: Ajax
- Product Code: FireProtect 2 SB white
- Availability: In Stock
-
3,119.00₴
- Ex Tax: 3,119.00₴
FireProtect 2 SB (Heat) is a wireless fire temperature sensor with built-in batteries. Equipped with a built-in siren for alarm and event notification. Can work as part of the Ajax security system and autonomously without a hub.
There are two thermistors on the outside of the sensor that quickly detect a rise in temperature. Sophisticated software protects against false alarms, and also provides a synchronous alarm of all fire detectors at the facility in just 20 seconds. This is more than required by modern fire safety standards. The SmartBracket mounting panel, in combination with in-app settings, ensures quick and easy installation.
Key capabilities
Advanced hardware and software
Synchronous alarm of all fire detectors at the facility in 20 seconds.
Built-in siren with a volume of 85 dB at a distance of 3 meters.
Ability to work without an Ajax hub.
Up to 10 years of operation from built-in batteries.
Easy to install and configure
SmartBracket mounting plate with the ability to align the sensor after installation.
Remote control and configuration in Ajax applications.
Adding to the Ajax hub by QR code.
Detection of a rapid rise in temperature
Two built-in thermistors are responsible for the reaction to temperature rise. Thermistors are located outside the sensor for faster threat detection.
If the room temperature exceeds 64°C or increases at a rate of 10°C per minute, the sensor recognizes this as a rapid increase in temperature and raises an alarm.
Synchronous alarm of fire detectors
The sensor supports synchronous fire alarms. The function activates the built-in sirens of all Ajax fire detectors in the system if at least one of them is triggered. In the event of a fire, this allows you to notify as many people as possible at the facility.
FireProtect 2 sensors have an advanced synchronous alarm algorithm that activates the sirens of all fire sensors in 20 seconds.The function works only when the sensors are connected to the hub.
Work without a hub
FireProtect 2 sensors can be used without connecting to an Ajax hub. In this case, the sensor notifies of fire alarms with a built-in siren and LED indication, but does not send a notification to the user's smartphone, Ajax Translator or PRO Desktop.
Manual and automatic testing
FireProtect 2 regularly checks the status of batteries and sensors. If a malfunction is detected, the hub will instantly send a message to users and the monitoring console. And the sensor itself will turn on the corresponding light and sound notification with a built-in siren and LEDs. All sensor states can be checked in Ajax applications at any time.
The sensor supports manual testing mode. The mode is activated when pressing the front panel of the sensor. The front panel is equipped with a mechanical button, so it can be pressed either by hand or with a mop. During the test, the built-in siren and sensor testing are triggered. This enables the installation engineer to test the device at any time and also to demonstrate to the customer the light and sound indication of the sensor for different types of alarms.
Autonomous work
FireProtect 2 (Heat) is produced in two versions - with built-in and with replaceable batteries. Sensors with replaceable batteries operate for up to 7 years on pre-installed CR123A batteries. After their discharge, the batteries can be replaced with new ones. The model with built-in batteries works for at least 10 years from the built-in lithium power cells. After the batteries are discharged, such a sensor must be replaced with a new one.
Quick installation and connection
To install FireProtect 2, it is not necessary to disassemble the sensor housing. Replaceable or non-replaceable batteries are pre-installed and the SmartBracket mount is removed from the sensor without tools. The SmartBracket mounting plate has a degree of freedom of 90. This allows the installation engineer to align the position of the sensor after installation.
The sensor connects to the Ajax security system in less than a minute.Just open the Ajax app, scan the QR code and add the device to the room and security group.
Detection of dangerous temperature
Sensitive element according to the requirements for temperature sensors of class A1
Temperature alarm for temperatures above 64°C
Alarm due to a sudden increase in temperature when the temperature rises by more than 10°C in 1 minute (or faster)
Additional features
Built-in siren volume of 85 dB at a distance of 3 meters. Audible notification of alarms. Active until the cause of the trigger is eliminated or until the user disables the notification.
Synchronous alarm of fire detectors. Fire sensors in the system turn on built-in sirens as soon as at least one of the sensors registers an alarm. A synchronous alarm is activated during one hub-to-sensor polling interval, but not more than 20 seconds later.
LED indication:
green - power indication
yellow - indication of malfunctions
red - indication of fire alarms
Button on the front panel of the sensor. In normal mode, when pressed, it starts the sensor test. In the event of an alarm or malfunction, pressing turns off the sensor's audible notification.
Technical characteristics:
Compatibility:
Hubs:
Hub Plus
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
Radio signal repeaters:
ReX
Rex 2
Jeweler communication technology
Two-way communication.
Device tamper protection.
Block encryption with a floating key.
Instant notifications.
Remote configuration via Ajax applications.
Radio frequency ranges: 868.0 – 868.6 MHz
Maximum effective radiated power (ERP): up to 20 mW
Radio signal modulation: GFSK
Radio range: up to 1700 m
Power supply: 2 built-in lithium batteries (up to 10 years of autonomous operation)
Dimensions: 124 x 124 x 45 mm
Weight: 273 g
Operating temperature range: from 0°C to +50°C
Permissible humidity: up to 80%
Protection class: IP20
Color: white
Complete set:
FireProtect 2 SB (Heat) Jeweler
SmartBracket mounting panel
Installation kit
Brief instructions
There are two thermistors on the outside of the sensor that quickly detect a rise in temperature. Sophisticated software protects against false alarms, and also provides a synchronous alarm of all fire detectors at the facility in just 20 seconds. This is more than required by modern fire safety standards. The SmartBracket mounting panel, in combination with in-app settings, ensures quick and easy installation.
Key capabilities
Advanced hardware and software
Synchronous alarm of all fire detectors at the facility in 20 seconds.
Built-in siren with a volume of 85 dB at a distance of 3 meters.
Ability to work without an Ajax hub.
Up to 10 years of operation from built-in batteries.
Easy to install and configure
SmartBracket mounting plate with the ability to align the sensor after installation.
Remote control and configuration in Ajax applications.
Adding to the Ajax hub by QR code.
Detection of a rapid rise in temperature
Two built-in thermistors are responsible for the reaction to temperature rise. Thermistors are located outside the sensor for faster threat detection.
If the room temperature exceeds 64°C or increases at a rate of 10°C per minute, the sensor recognizes this as a rapid increase in temperature and raises an alarm.
Synchronous alarm of fire detectors
The sensor supports synchronous fire alarms. The function activates the built-in sirens of all Ajax fire detectors in the system if at least one of them is triggered. In the event of a fire, this allows you to notify as many people as possible at the facility.
FireProtect 2 sensors have an advanced synchronous alarm algorithm that activates the sirens of all fire sensors in 20 seconds.The function works only when the sensors are connected to the hub.
Work without a hub
FireProtect 2 sensors can be used without connecting to an Ajax hub. In this case, the sensor notifies of fire alarms with a built-in siren and LED indication, but does not send a notification to the user's smartphone, Ajax Translator or PRO Desktop.
Manual and automatic testing
FireProtect 2 regularly checks the status of batteries and sensors. If a malfunction is detected, the hub will instantly send a message to users and the monitoring console. And the sensor itself will turn on the corresponding light and sound notification with a built-in siren and LEDs. All sensor states can be checked in Ajax applications at any time.
The sensor supports manual testing mode. The mode is activated when pressing the front panel of the sensor. The front panel is equipped with a mechanical button, so it can be pressed either by hand or with a mop. During the test, the built-in siren and sensor testing are triggered. This enables the installation engineer to test the device at any time and also to demonstrate to the customer the light and sound indication of the sensor for different types of alarms.
Autonomous work
FireProtect 2 (Heat) is produced in two versions - with built-in and with replaceable batteries. Sensors with replaceable batteries operate for up to 7 years on pre-installed CR123A batteries. After their discharge, the batteries can be replaced with new ones. The model with built-in batteries works for at least 10 years from the built-in lithium power cells. After the batteries are discharged, such a sensor must be replaced with a new one.
Quick installation and connection
To install FireProtect 2, it is not necessary to disassemble the sensor housing. Replaceable or non-replaceable batteries are pre-installed and the SmartBracket mount is removed from the sensor without tools. The SmartBracket mounting plate has a degree of freedom of 90. This allows the installation engineer to align the position of the sensor after installation.
The sensor connects to the Ajax security system in less than a minute.Just open the Ajax app, scan the QR code and add the device to the room and security group.
Detection of dangerous temperature
Sensitive element according to the requirements for temperature sensors of class A1
Temperature alarm for temperatures above 64°C
Alarm due to a sudden increase in temperature when the temperature rises by more than 10°C in 1 minute (or faster)
Additional features
Built-in siren volume of 85 dB at a distance of 3 meters. Audible notification of alarms. Active until the cause of the trigger is eliminated or until the user disables the notification.
Synchronous alarm of fire detectors. Fire sensors in the system turn on built-in sirens as soon as at least one of the sensors registers an alarm. A synchronous alarm is activated during one hub-to-sensor polling interval, but not more than 20 seconds later.
LED indication:
green - power indication
yellow - indication of malfunctions
red - indication of fire alarms
Button on the front panel of the sensor. In normal mode, when pressed, it starts the sensor test. In the event of an alarm or malfunction, pressing turns off the sensor's audible notification.
Technical characteristics:
Compatibility:
Hubs:
Hub Plus
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
Radio signal repeaters:
ReX
Rex 2
Jeweler communication technology
Two-way communication.
Device tamper protection.
Block encryption with a floating key.
Instant notifications.
Remote configuration via Ajax applications.
Radio frequency ranges: 868.0 – 868.6 MHz
Maximum effective radiated power (ERP): up to 20 mW
Radio signal modulation: GFSK
Radio range: up to 1700 m
Power supply: 2 built-in lithium batteries (up to 10 years of autonomous operation)
Dimensions: 124 x 124 x 45 mm
Weight: 273 g
Operating temperature range: from 0°C to +50°C
Permissible humidity: up to 80%
Protection class: IP20
Color: white
Complete set:
FireProtect 2 SB (Heat) Jeweler
SmartBracket mounting panel
Installation kit
Brief instructions
Characteristics
| Device type | wireless fire detector |
| Product line | Residence Line |
| Communication channels | Jeweler communication technology |
| Operating frequency | 868 MHz |
| Power supply | 2 permanent lithium batteries |
| Color | white |
| Degree of protection | IP20 |
| Operating temperature, °C | 0 ~ +50 |
| Dimensions, mm | 124 x 124 x 45 |
| Weight, g | 273 |
| Warranty, month | 24 |
