Ajax WaterStop 1" black Water shut-off faucet with remote control

  • Brand: Ajax
  • Product Code: WaterStop 1" black
  • Availability: In Stock
  • 8,499.00₴

  • Ex Tax: 8,499.00₴

WaterStop Jeweler is a smart water shut-off faucet with remote control. It works as part of an automated anti-flood system as part of the Ajax system. You can control WaterStop from anywhere in the world where there is an Internet connection: Ajax programs allow you to check the status and change the position of the faucet at any time.
Key capabilities

Automation scenarios are activated by leakage sensor alarm, schedule and change of protection mode
Prevention of jamming. Adjusted with a period of up to 1 week
Bonomi stopcock 1⁄2, 3⁄4 or 1" included
Up to 3 years of operation from installed batteries
Remote control and configuration in Ajax applications
Water shut-off control with a button on the electric drive and a lever on the shut-off valve up to 1100 m
Range of radio communication with the hub or repeater of the radio signal in the absence of interference
Mounting brackets for complicated unauthorized dismantling of the electric drive
Optional operation from a third-party power supply unit 9 V⎓, 2 A
Connection to the system by QR code
The electric drive is protected against overheating. It can operate at temperatures up to 60°C at the installation site.

An element of the antiflood system
WaterStop is designed for remote control of water supply at the facility. The device combines a shut-off valve in one of three variations and an electric drive. You can control WaterStop from anywhere in the world where there is an Internet connection - Ajax programs allow you to check the status and change the position of the faucet at any time.
When alarmed by LeaksProtect or a third-party leakage sensor, WaterStop will automatically shut off the water in 5 seconds. All system users will be notified of the alarm and script activation. In addition to the leakage sensor alarm scenario, the installation engineer can configure water shut-off according to the schedule or changing the protection mode.
Powerful electric drive and manual control
The WaterStop electric drive has a maximum torque of 10 N•m. Such power allows you to close a jammed shut-off valve without breaking it.And under normal conditions, shut off the water 5 seconds after the command.
You can control the water supply not only through programs and scripts, but also manually. For this purpose, a button is provided on the WaterStop body, and a special lever is provided on the mounting platform of the shut-off valve. This is convenient, for example, when replacing an electric drive or during the work of a plumber.
The status of the faucet can be seen in Ajax programs, determined by the color of the Ajax logo on the WaterStop body or by the position of the lever.
Standard type of shut-off valve
The device is equipped with a Bonomi shut-off valve. It is suitable for both hot and cold water. WaterStop is presented in three versions: with a tap on 1⁄2, 3⁄4 or 1.
WaterStop is compatible with shut-off valves manufactured according to the ISO 5211 standard. Therefore, a plumber can easily install a standardized stop valve, and after the installation engineer can add the device to the system.
When moving, the WaterStop can be easily dismantled and installed on another compatible faucet in the new location. The electric drive is removed from the shut-off valve in a few seconds – no tools are needed.
Automation scenarios
Scripts allow you to reduce the number of routine actions and automatically shut off the water. Scripts can be used to control the water supply:

By alarm – when the LeaksProtect leakage sensor is alarmed.
According to the schedule - when you need to shut off the water at a certain time.
When the protection mode is changed - when the object is put on protection or removed from protection.
When the LightSwitch is pressed, for example, when the last employee leaves the office.
By pressing the Button - for manually turning off the water in case of an emergency.
By temperature - to shut off the water in the heating pipes for the winter.

Protection against sabotage
WaterStop can be installed in offices, restaurants, cafes and other public places. There is an alternative mounting bracket to protect against unauthorized dismantling. This bracket is installed instead of the standard one to prevent disassembly of the electric drive.Unlike a standard bracket, it cannot be removed without tools.
When the electric drive is removed from the shut-off valve, the tamper is activated. The hub regularly (with a specified frequency) checks the status of connected devices and informs about the loss of communication with each of them. All users and the control panel of the security company receive a notification about the loss of communication.
Thoughtful design
WaterStop is a wireless device that runs on installed batteries. If necessary, the installation engineer can connect a third-party power supply unit of 9 V, 2 A.
The electric drive is mounted on the shut-off valve in one of four positions. The housing of the electric drive does not need to be disassembled for installation, it is fixed on the faucet with a mounting bracket, without tools. Thanks to this, there is no risk of damaging the electronics.
Easy installation and connection
WaterStop is installed by two specialists: a plumber and an installation engineer. Therefore, we made sure that it was convenient for them to work with the product.
A plumber can install a standard compatible shut-off valve without an installation engineer. He only needs to know the dimensions of the electric valve. An installation engineer can come another day, install the electric drive and integrate it into the Ajax security system.
The device connects to the Ajax security system in less than a minute.It is enough to open the Ajax application, scan the QR code, add the device to the room and group.
Technical characteristics:
Compatibility
Hubs:

Hub Plus
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)

Radio signal repeaters:

ReX
Rex 2

Communication range with the hub up to 1100 m (in the absence of obstacles)
Operating temperature range: from 0°C to +60°C
Permissible humidity: up to 95%
Protection class: IP56
Battery power: 4 CR123A batteries (up to 3 years of autonomous operation)
Optional external power supply: 9 V⎓, 2 A (when external power is connected, the batteries become a backup power source)
Electric water shut-off: torque up to 10 N•m
Water shut-off speed: up to 5 seconds (the value may increase due to contamination of the shut-off valve)
Temperature range of liquids with which the shut-off valve can work: from +5°C to +120°C
Working pressure: 40 bar
Stopcock material: brass
Connection type and stopcock thread: 1" (25 mm)
Overall dimensions: 104.5 × 159 × 70 mm
Dimensions of the electric drive: 93 × 70 × 95 mm
The dimensions of the Bonomi stopcock 1": 90 × 41 mm
Total weight: 1336 g
Weight of the electric drive: 536 g
The weight of the Bonomi stopcock 1": 800 g
Color: black
Complete set:

WaterStop Jeweller.
Two mounting brackets: standard (pre-installed) and alternative (anti-tamper).
CR123A batteries (installed) - 4 pcs.
Brief instructions.

Characteristics

Device typeball valve with an electric drive
Installation typeinternal, indoors
Operating frequency868 MHz
Power supply4 CR143A batteries
Supply voltage / power sourceoptional external power supply 9-12 V, 2 A
Degree of protectionIP56
Operating temperature, °C0 ~ +60
Dimensions, mm104,5 × 159 × 70
Weight, g1336
Warranty, month24

Write a review

Please login or register to review