Ajax ManualCallPoint (Green) Jeweler Wireless programmable button with reset mechanism

  • Brand: Ajax
  • Product Code: BZ-304497
  • Availability: In Stock
  • 2,599.00₴

  • Ex Tax: 2,599.00₴

ManualCallPoint (Green) Jeweler is a wireless programmable button with a reset mechanism. Unlike the red version of the button (Red), which is configured as the "Fire Alarm Button" by default, the green button (Green) requires manual configuration and can be used in different modes. The button allows you to activate an alarm in an emergency or run automation scenarios. To transmit signals, the device uses the protected Jeweler protocol, which ensures a stable connection with the hub at a distance of up to 1700 meters in the absence of interference.
To activate the alarm or perform a programmed action, it is necessary to lift the transparent protective cover (if it is installed) and press the central part of the button (a fragile, renewable element). The fragile element moves inward, activating an alarm or script, and two yellow bars appear above and below the button, indicating the current state of the device. ManualCallPoint (Green) Jeweler can work in several modes: script activator (default), fire alarm button, emergency button, panic button, gas leak alarm, fault message, flood alarm.
By default, the device operates in “Script Activator” mode, allowing you to power devices on or off, unlock exits, and perform other security automation tasks. When the button is activated, users receive notifications in the Ajax application, and events are recorded in the system, they can be transferred to the PCS with appropriate settings. Depending on the selected mode, the system can activate Ajax sirens. If the button is configured as "Fire Alarm Button", the built-in sirens of the Ajax fire detectors are activated in the event of an activated fire detector synchronous alarm. Sirens remain active until reset ManualCallPoint (Green) Jeweler.
To reset the button, it is necessary to insert the complete key into a special hole.After resetting, the button returns to its original position and is ready to be used again. At the same time, you can configure the execution of the script during the reset. The device is intended for indoor use only. The pre-installed battery provides up to 7 years of operation under normal use (one press per week). With more frequent use, the service life may be shortened. The charge level can be checked in the Ajax application.
Main advantages:

Wireless: ManualCallPoint (Green) Jeweler uses Jeweler's secure radio protocol, which provides stable communication with the hub at a distance of up to 1700 meters without interference. This allows you to install the button in a convenient place without having to run wires.

Flexibility in configuration: Unlike the red version, which operates in "Fire Alarm Button" mode, the green version supports programmable scenarios and can be configured by the user for different tasks, including panic button, gas leak alarm or automation control.

Simple alarm activation: To activate the alarm or execute the script, it is enough to lift the transparent protective cover (if installed) and press the central part of the button. The fragile element moves inward, causing an alarm and displaying the device's status with the help of yellow indicator bars.

Reset mechanism: Once the alarm has been activated, the device can be easily reset with the included key. If necessary, you can configure the execution of the script during the reset. The button is intended for repeated use without replacing components.

Autonomous operation: The built-in battery provides up to 7 years of operation under standard use (one press per week lasting one minute). Battery life may decrease with more frequent use.The charge level can be checked at any time through the Ajax application.

Protection against accidental presses: The set includes a transparent protective cover that prevents accidental activation. Its installation is not mandatory, but it can increase the reliability of the device.

Ajax compatibility: The button integrates with Ajax hubs and other devices in the ecosystem, allowing you to configure automation scenarios, control alarms and send alarms to the ATS.

Easy installation: The device is easily attached to the wall with the help of complete mounting elements. If necessary, the button can be quickly dismantled and installed in another place.

Technical characteristics:

Communication technology: Jeweler
Radio frequency ranges: 868.0-868.6 MHz
Maximum effective radiated power (ERP): up to 25 mW
Radio communication range: up to 1700 m in the absence of obstacles
RF Hopping: Prevents radio interference and jamming
Power supply: 2 × CR123A (pre-installed)
Battery life: up to 7 years with normal use (one press of 1 minute per week)
Operating temperature range: from 0 °C to +50 °C
Permissible humidity: up to 80%
Compatible with Ajax devices: Hub (4G) Jeweler, Hub 2 (2G) Jeweler, Hub 2 (4G) Jeweler, Hub 2 Plus Jeweler, Hub BP Jeweler, Hub Hybrid (2G), Hub Hybrid (4G), Hub Plus Jeweler, ReX 2 Jeweler, ReX Jeweler.Functional capabilities:

Resizable flexible element: Activates the button
Modes of operation: fire alarm button, scenario activator, emergency button, panic button, gas leak alarm, fault message, flood alarm
LED indication of states: fire alarm, malfunctions
Synchronous alarm of fire detectors: after pressing the button
Critical Alerts: Supported

Safety and security:

Protection against accidental presses: the transparent cover protects the button from false activations
Special tool (key): reset the button after pressing, hole on the body for fixing the key chain on the ring, convenient disassembly
Tamper protection: tamper alarm, tamper protection, device authentication, communication loss detection from 36 seconds

Assembly and installation:

Recommended installation height: 1.4 m
Place of installation: only indoors
Dimensions: 102 × 104 × 39 mm
Weight: 214 g
Color: green

Complete set:

ManualCallPoint (Green) Jeweler
SmartBracket mounting panel
Special tool (wrench)
2 CR123A batteries (pre-installed)
Installation kit
Brief instructions

Characteristics

Device typemanual control button
Product lineResidence Line
Installation typeinternal
Communication channelsJeweler communication technology
Operating frequency868 MHz
Range of communication with the center / receiver, m1700 (open space)
Power supplybattery CR123A – 2 pcs.
Supply voltage / power source2 × CR123A batteries (pre-installed)
Installation height, m1.4
Colorgreen
Operating temperature, °C0 ~ +50
Dimensions, mm102x104x39
Weight, g214
Warranty, month24

Write a review

Please login or register to review