Ajax ManualCallPoint (Red) Jeweler Wireless programmable button with reset mechanism for manual fire alarm activation

  • Brand: Ajax
  • Product Code: BZ-280700
  • Availability: In Stock
  • 2,599.00₴

  • Ex Tax: 2,599.00₴

ManualCallPoint (Red) Jeweler is a wireless wall button designed to manually activate a fire alarm. The device is used in emergency situations for immediate fire notification. The button is equipped with a reset mechanism, which is performed using a special key included in the kit. Installation of the device is possible only indoors. By default, ManualCallPoint (Red) Jeweler operates in Fire Alarm Button mode. To transmit alarm signals and other events, the device uses the secure Jeweler protocol, which provides communication with the hub at a distance of up to 1,700 meters in the absence of interference.
To activate the alarm, it is necessary to lift the transparent protective cover (if it is installed) and press the central part of the button. Inside is a recoverable fragile element that moves inward when pressed, activating the alarm. At the same time, two yellow bars appear above and below the button, indicating the status of the device. The duration of the alarm depends on the settings of the siren and the hub. If the "Activate siren when pressing the fire alarm button" function is enabled in the siren settings, then the duration of the signal will correspond to the selected time. If the "Fire Detectors Synchronous Alarm" feature is enabled in the hub settings, then the alarm on fire detectors with built-in sirens will continue until the ManualCallPoint (Red) Jeweler is reset.
To reset the device, a special key is used, which is inserted into the corresponding hole. Once reset, the button is ready to be used again. The device can be equipped with a transparent cover that protects against accidental presses, but its installation is not mandatory.ManualCallPoint (Red) Jeweler supports several modes of operation: Fire Alarm Button (default), Emergency Button, Panic Button, Gas Leak Alarm, Fault Notification, Flood Alarm, and Scenario Activator.
The device is equipped with a pre-installed battery that provides up to 7 years of operation with normal use (one press per week lasting one minute). Battery life may decrease with more frequent use. You can check your battery level in the Ajax app at any time.
Main advantages:

Wireless: The device uses the Jeweler's secure radio protocol, which provides a stable connection with the hub at a distance of up to 1700 meters in the absence of interference. This allows you to install the button in a convenient place without having to run wires.

Simple activation of the alarm: It is enough to lift the transparent protective cover (if installed) and press the central part of the button. A fragile element will move inside, causing an alarm and visually displaying the state of the device.

Reset mechanism: After activating the alarm, the device can be easily reset with a special key. This allows the button to be reused multiple times without replacing components.

Multiple modes of operation: Supports multiple modes, including fire alarm, emergency, panic button, gas leak alarm, fault notification and scenario activator. Settings can be changed through the Ajax application.

Autonomous operation: The built-in battery provides up to 7 years of operation under standard use (one press per week lasting one minute). The charge level can be checked at any time via the mobile application.

Protection against accidental presses: The set includes a transparent protective cover that prevents accidental activation.Its installation is not mandatory, but it can increase the reliability of the device.

Ajax compatibility: The button integrates with Ajax hubs and other devices in the ecosystem, allowing you to configure automation scenarios and alarm control. Activation of sirens and synchronization with fire detectors is supported.

Easy installation: The button is easily attached to the wall using the included mounting elements. If necessary, it can be quickly dismantled and installed in another place.

Technical characteristics:

Communication technology: Jeweler
Radio frequency ranges: 868.0-868.6 MHz
Maximum effective radiated power (ERP): up to 25 mW
Radio communication range: up to 1700 m in the absence of obstacles
RF Hopping: Prevents radio interference and jamming
Power supply: 2 × CR123A (pre-installed)
Battery life: up to 7 years with normal use (one press of 1 minute per week)
Operating temperature range: from 0 °C to +50 °C
Permissible humidity: up to 80%
Compatible with Ajax devices: Hub (4G) Jeweler, Hub 2 (2G) Jeweler, Hub 2 (4G) Jeweler, Hub 2 Plus Jeweler, Hub BP Jeweler, Hub Hybrid (2G), Hub Hybrid (4G), Hub Plus Jeweler, ReX 2 Jeweler, ReX Jeweler.Functional capabilities:

Resizable flexible element: Activates the button
Modes of operation: fire alarm button, scenario activator, emergency button, panic button, gas leak alarm, fault message, flood alarm
LED indication of states: fire alarm, malfunctions
Synchronous alarm of fire detectors: after pressing the button
Critical Alerts: Supported

Safety and security:

Protection against accidental presses: the transparent cover protects the button from false activations
Special tool (key): reset the button after pressing, hole on the body for fixing the key chain on the ring, convenient disassembly
Tamper protection: tamper alarm, tamper protection, device authentication, communication loss detection from 36 seconds

Assembly and installation:

Recommended installation height: 1.4 m
Place of installation: only indoors
Dimensions: 102 × 104 × 39 mm
Weight: 214 g
Color: red

Complete set:

ManualCallPoint (Red) Jeweler
SmartBracket mounting panel
Special tool (wrench)
2 CR123A batteries (pre-installed)
Installation kit
Brief instructions

Characteristics

Device typemanual control button
Product lineResidence Line
Installation typeinternal
Communication channelsJeweler communication technology
Operating frequency868 MHz
Range of communication with the center / receiver, m1700 (open space)
Power supplybattery CR123A – 2 pcs.
Supply voltage / power source2 × CR123A batteries (pre-installed)
Installation height, m1.4
Colorred
Operating temperature, °C0 ~ +50
Dimensions, mm102x104x39
Weight, g214
Warranty, month24

Write a review

Please login or register to review