Electromagnetic lock YM-2400SL for access control system

  • 4,500.00₴

  • Ex Tax: 4,500.00₴

YM-2400SL is a mortise electromagnetic lock with a holding force of up to 1200 kg per break.

Yli Electronic brand

Designed for internal installation on heavy metal, metal-plastic, wooden doors.

WHAT IS AN ELECTROMAGNETIC LOCK

A magnetic or electromagnetic lock is a device for closing doors, the principle of operation of which is based on magnetic interaction. It consists of a case with an electromagnet and a corresponding bar made of metal with high magnetic permeability.

HOW THE YM-2400SL ELECTROMAGNETIC LOCK WORKS

The electromagnetic lock is installed on the door frame, the corresponding bar - on the door. When power is supplied (DC12V) - the lock magnetizes the corresponding bar, securely closing the door. In the absence of power, the lock unlocks, which meets fire safety requirements.

To compensate for the impact when closing the door, a rubber gasket is provided on the corresponding bar.

WHERE ELECTROMAGNETIC LOCK IS USED

Electromagnetic locks are used as executive devices in access control and control systems (ACCs). Most often, they are installed on entrance doors in entrances, offices, banks, business centers, etc.premises

TECHNICAL CHARACTERISTICS OF ELECTROMAGNETIC LOCK YM-2400SL

Holding force: 1200 kg

Body material: anodized aluminum

Material of the corresponding part: zinc

Power supply: DC12V

Consumption: 850mA (active), 400mA (idle)

Dimensions:

lock: 182x30x25 mm;

corresponding bar: 182x30x23.6 mm

INSTALLATION OF THE ELECTROMAGNETIC LOCK

Prepare a niche for the lock and bring up the wire.

Connect the wire to the lock.

Install the lock in the niche and fasten with screws.

Prepare a niche in the door for the corresponding bar (so that in the locked state the corresponding bar is opposite the lock).

IMPORTANTLY! Do not overtighten the nut of the corresponding bar - it should spring a little thanks to the rubber gasket, to ensure a tighter contact between the corresponding bar and the magnet.

POWER CONNECTION

Connect the electromagnetic lock to the power supply:

(+) to the red wire;

(-) to black

COMPATIBILITY

The electromagnetic lock YM-2400SL is compatible with coded keyboards, readers, exit buttons, audio intercoms and video intercoms of all types and other devices of access control systems.

Characteristics

Device typeelectromagnetic lock
Place of installationrooms
Installation typecut in
Holding force, kg1200
Delay timerthere are
Indicationlight
Supply voltage12 V
Consumption current, mA850
Materialanodized aluminum (lock), zinc (matching bar)
Colorsilvery
Operating temperature, °C-10 ~ +55
Dimensions, mmcastle: 182 x 30 x 25; corresponding bar: 182 x 30 x 23.6
Weight, g1200
Warranty, month36

Write a review

Please login or register to review