Electromagnetic lock YM-280NT(LED) for access control system

  • 2,350.00₴

  • Ex Tax: 2,350.00₴

YM-280NT(LED) is an overhead electromagnetic lock with an LED display, a delay timer for 0,3,6,9 seconds and a lock status sensor with a holding force of up to 280 kg per break. There are dry contacts for determining the state of the lock (NO, NC, COM).

Yli Electronic manufacturing company

Designed for internal installation on metal, fire-resistant, wooden doors or glass doors (using a mounting corner).

WHAT IS AN ELECTROMAGNETIC LOCK

A magnetic or electromagnetic lock is a device for closing doors, the principle of operation of which is based on magnetic interaction. It consists of a case with an electromagnet and a corresponding bar made of metal with high magnetic permeability.

HOW THE YM-280NT(LED) ELECTROMAGNETIC LOCK WORKS

The electromagnetic lock is installed on the door frame, the corresponding bar - on the door. When power is supplied (DC12V/DC24V) – the lock magnetizes the corresponding bar, securely closing the door. In the absence of power, the lock unlocks, which meets fire safety requirements.

To compensate for the impact when closing the door, a rubber gasket is provided on the corresponding bar.

WHERE ELECTROMAGNETIC LOCK IS USED

Electromagnetic locks are used as executive devices in access control and control systems (ACCs). Most often, they are installed on entrance doors in entrances, offices, banks, business centers, etc.premises

TECHNICAL CHARACTERISTICS OF ELECTROMAGNETIC LOCK YM-280NT(LED)

Holding force: 280 kg

Delay time: 0,3,6,9 sec

Indication: LED

Body material: anodized aluminum

Material of the corresponding part: zinc

Power supply: DC12V | DC24V (switchable with a jumper on the lock)

Consumption: 12V/520mA | 24V/260mA

Dimensions:

lock with mounting bar: 250 x 48.8 x 27.9 mm;

corresponding bar: 180 x 38.8 x 13 mm

COMPLETE YM-280NT(LED)

electromagnetic lock with mounting bar

relevant part

mounting kit

mounting sticker with markings

instruction

INSTALLATION OF THE ELECTROMAGNETIC LOCK

CORRESPONDING BAR

Paste the stencil in the place of installation of the corresponding part on the door;

From the outer part of the door, drill a hole d=16mm (according to the instructions, but not all the way!), and two shallow holes d=8mm on the inside of the door to fix the corresponding bar;

Secure the relevant part by installing a flat head bolt on the outside of the door. Put a rubber gasket on the inside and install the corresponding part on it. Lock the nut with a hex key

IMPORTANT! Do not overtighten the nut of the corresponding bar - it should spring a little thanks to the rubber gasket, to ensure a tighter contact between the corresponding bar and the magnet.

LOCK FIXING BAR

Fasten the mounting bar of the electromagnetic lock in the upper corner of the box using the self-tapping screws from the kit.

ELECTROMAGNETIC LOCK

Attach the electromagnetic lock to the mounting bar and tighten the two screws (at the bottom of the lock) using a small hex key.

POWER CONNECTION

Connect the electromagnetic lock to the power supply:

(+) to the red wire;

(-) to black

COMPATIBILITY

Electromagnetic lock YM-280NT(LED) is compatible with code keyboards, readers, exit buttons, with audio intercoms and video intercoms of all types and other devices of access control systems.

Characteristics

Device typeelectromagnetic lock
Place of installationrooms
Installation typeinvoice
Holding force, kg280
Delay timerthere are
Compatibility and features of the electric lockMBK-280NGZ, MBK-280/350/500GU, MBK-280NZLC, MBK-280NL, MBK-280U, MBK-280NZL, MBK-280NLC, MBK-280NI
Indicationlight
Supply voltage12 V, 24 V
Consumption current, mA520 / 260
Materialanodized aluminum (lock), zinc (matching bar)
Colorsilvery
Operating temperature, °C-10 ~ +55
Dimensions, mmlock: 250 x 48.8 x 27.9, corresponding bar: 180 x 38.8 x 13
Weight, g2100
Warranty, month36

Write a review

Please login or register to review