Electric latch YS-136NC-S (power closed) for the access control system
- Brand: Yli Electronic
- Product Code: YS-136NC-S
- Availability: In Stock
-
2,250.00₴
- Ex Tax: 2,250.00₴
YS-136NC-S (power closed) – mortise reinforced electromechanical latch with door status sensor. Holding force up to 1000 kg.
The electric fastener is intended for installation on PVC, metal-plastic or wooden doors.
Brand: Yli Electronic
What is an electromechanical clasp?
The electromechanical latch is a matching part with a mechanical latch for a conventional mechanical lock or door handle with a tab. A non-pressure handle is installed on the outside of the door.
How the YS-136NC-S electromechanical latch works (power closed)
When power is removed from the access control device (e.g., exit button, reader, radio controller, etc.), the electric latch release releases the extended bolt of the mechanical lock, allowing the door to be opened without pressing the handle or turning the key.
When the door is returned to the closed position, the latch of the electromechanical latch is locked, thus holding the bolt of the lock in the locked position.
Where an electromechanical clasp is used
An electromechanical latch is widely used as part of a simple access control and control system (ACC). It is installed on metal, plastic, metal-plastic or wooden doors in offices, banks, business centers, hotels or other premises.
Technical characteristics of the electromechanical latch YS-136NC-S (power closed)
Type of installation: recessed
Holding force: 1000 kg
With power: closed
Contacts: NO/NC/COM
Power supply: DC12V
Consumption: 320mA
Material: stainless steel
Dimensions: 123x43x42mm
Door status sensor (tab/latch) - allows you to monitor the status or movement of the door - open/closed.
The electric fastener is intended for installation on PVC, metal-plastic or wooden doors.
Brand: Yli Electronic
What is an electromechanical clasp?
The electromechanical latch is a matching part with a mechanical latch for a conventional mechanical lock or door handle with a tab. A non-pressure handle is installed on the outside of the door.
How the YS-136NC-S electromechanical latch works (power closed)
When power is removed from the access control device (e.g., exit button, reader, radio controller, etc.), the electric latch release releases the extended bolt of the mechanical lock, allowing the door to be opened without pressing the handle or turning the key.
When the door is returned to the closed position, the latch of the electromechanical latch is locked, thus holding the bolt of the lock in the locked position.
Where an electromechanical clasp is used
An electromechanical latch is widely used as part of a simple access control and control system (ACC). It is installed on metal, plastic, metal-plastic or wooden doors in offices, banks, business centers, hotels or other premises.
Technical characteristics of the electromechanical latch YS-136NC-S (power closed)
Type of installation: recessed
Holding force: 1000 kg
With power: closed
Contacts: NO/NC/COM
Power supply: DC12V
Consumption: 320mA
Material: stainless steel
Dimensions: 123x43x42mm
Door status sensor (tab/latch) - allows you to monitor the status or movement of the door - open/closed.
Characteristics
| Device type | electric clasp |
| Installation type | cut in |
| Position on the door | universal |
| Holding force, kg | 1000 |
| Without power | unlocked |
| Lath | short |
| Power supply | DC 12V |
| Supply voltage / power source | DC 12 V |
| Consumption current, mA | 320 |
| Color | silvery |
| Material | stainless steel |
| Operating temperature, °C | -10 ~ +55 |
| Dimensions, mm | 123 x 43 x 42 |
| Weight, g | 340 |
| Warranty, month | 12 |
